JVC FS-H300 manual Recording Discs Disc Synchronized Recording

Recording Discs

—Disc Synchronized Recording

You can start disc play and recording at the same time.

On the unit ONLY:

1 Put a recordable cassette in with the exposed part of the tape down.

•See also page 14.

2 Close the cassette holder gently.

3	Press CD ‹/8 to select the CD			CD
				#/8
	player as the source.
	Press 7 to stop the disc
4		4	7	¢
		DOWN		UP

playback.

•You can make a program (see page

11)if you want.

5	Press REC (recording).	REC
	3 indicator lights up on the display.
		REC
6	Press TAPE ¤ ‹.	TAPE

“SYNC REC” appears and 3 indicator starts flashing slowly on the display.

CD playback and tape recording starts automatically.

REC

•If no cassette is inserted when you press REC “NO TAPE” appears on the display.

•If a protected tape is inserted when you press REC “PROTECT” appears on the display.

English

To stop recording for a moment, press REC.			REC
Both the CD playback and tape recording are
paused. To resume recording, press TAPE ¤ ‹.
To stop recording, press 7.	DOWN		UP
	4	7	¢

The recording stops and the CD playback is paused.

To record on both sides—Reverse Mode

On the remote control ONLY:

Press REV.MODE (reverse mode)			REV.MODE
repeatedly until	or	is lit.

•When using the Reverse Mode for Disc

Synchronized Recording, lights up and the recording starts in the forward ( 3 ) direction first. When the tape reaches its end, the CD playback is paused until the tape recording changes to the reverse direction, then the recording continues.

To cancel the Reverse Mode, press REV.MODE repeatedly

until is lit.

When making Sleep Timer settings while doing Disc

Synchronized Recording

Set enough time to allow for the disc to finish playing; otherwise, the power will go off before recording is completed.

18