11
English

Using the Tuner

You can listen to FM and AM stations. Stations can be tuned
in manually, automatically, or from preset memory storage.
■Before listening to the radio:
• Make sure that both the FM and AM antennas are cor-
rectly connected. (See pages 4 and 5).

Setting the AM Tuner Interval Spacing

When shipped, the AM tuner interval is set to 9 or 10 kHz
spacing (Initial setting : U/UT/US...9 kHz, UY...10 kHz).
You can change it to 10 or 9 kHz spacing.
●Preparation to setting:
Turn on the power and press the FM/AM button to select
FM or AM mode.
To select 10 kHz intervals, while holding down the 7
button on the Unit, press the VOLUME + button on the
Unit. “AM 10kHz” will appear on the display (at the same
time, the 100 kHz spacing is selected for FM broadcast).
To select 9 kHz intervals, while holding down the 7 but-
ton on the Unit, press the VOLUME − button on the Unit.
“AM 9kHz” will appear on the display.
[10 kHz Intervals] [9 kHz Intervals]
• When you change the setting, the preset stations are
erased. You will need to preset the stations again. (See
page 12.)

One Touch Radio

Just press the FM/AM button to turn on the System and start
playing the station you were last tuned to.
■You can switch from any other sound source to the radio
by pressing the FM/AM button.

Tuning In a Station

1Press the FM/AM button.
The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be-
tween FM and AM.
2Select a station using one of the follow-
ing methods.
●Manual Tuning
Press the 4 or ¢ button on the Unit or the Re-
mote Control repeatedly to move from frequency to
frequency until you find the station you want.
OR
●Auto Tuning
If you press and hold the 4 or ¢ button on the
Unit or the Remote Control for one second or more,
the frequency changes down, or up, automatically un-
til a station is found. OR
●Preset Tuning using the Remote Control
(Possible only after presetting stations)
Select the desired preset number using the UP,
DOWN, > and < button on the Remote Control. After
1 second the display will show the preset number’s
band and frequency.
Example:
Press the UP button until the preset number 12 “P12”
appears.
REMOTE CONTROL
DIMMER SLEEP
DISPLAY FM MODE
AHB PRO CD
PROGRAM
DOOR
SLIDE
AUTO
PRESET
REPEATRANDOM
BASS TREBLE CANCEL
UP
SET
DOWN
MD/AUX FM
/
AM
VOLUME
FADE MUTING
CD
STEREO
MONO
<
FM MODE
DOWN
¢
4
AUTO
PRESET
UP
>
FM/AM
Band display, Frequency display, Preset channel
FM mode
indicators
FM/AM
4
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
¢
SET
PRESET
TUNING
7VOLUME +, −
VOLUME
VOLUME
UT ... Taiwan ROC
US ... Singapore UY ... Argentina
U...Others
FM
/
AM
FMAM
FM/AM
FMAM
(on the Remote Control) (on the Unit)
DOWN
UP
(After 1 second)
or
FS-SD5&7&9_A1.fm Page 11 Thursday, June 1, 2000 9:26 AM