15
Using the CD Player
English
FS-SD1000(UB, US, UW, UY) / LVT0685-002A / English

To Unload a CD

Take out the CD as shown below.

Basics of Using the

CD Player-Normal Play

To Play a CD

1Insert a CD.
2Press the CD #¥8 button.
The first track of the CD begins playing.
The track number that has already played disappears
from the music calendar.
The CD Player automatically stops when the last
track of the CD has finished playing.
To stop playing the CD, press the 7 button.
The following information for the CD is displayed.
To stop playing and remove the CD, press the OPEN/
CLOSE button on the Unit or CD 0 button on the Remote
Control to open the Top Cover.
To pause, press the CD #¥8 button. The playback time
blinks on the display.
To cancel pause, press the same button again. Play con-
tinues from the point where it was paused.

To Select a Track or Passage within a Track

During playback, press the 4 or ¢ (< or >) button to se-
lect the track you want.
The selected track starts playing.
Press the ¢ or > button once to skip to the begin-
ning of the next track.
Press the 4 or < button to skip to the beginning of
the track being played. Press twice quickly to skip to
the beginning of the previous track.
When the > or < button on the Remote Control is
kept pressing, the track continuously skips.

Search Play

Holding down the 4 or ¢ button, during playback, will
fast forward/backwards the CD so you can quickly find a
particular passage in the track you are listening to.

Programming the

Playing Order of the Tracks

You can program the playing order of the tracks using the
Remote Control.
You can program up to 32 tracks in any desired order in-
cluding the same tracks.
You can only make a program when the CD Player is
stopped.
1Insert a CD.
2Press the CD #/8 button.
3Press the 7 button to stop the CD.
4Press the PROGRAM button.
The System enters the programming mode and the
“PROGRAM” indicator lights up.
5Press the UP, DOWN, >, or < button to

select the track to program.

UP or > button: Increases the track number by 1.
DOWN or < button:Decreases the track number by 1.
When the > or < button is kept pressing, the track
number changes rapidly.
(To be continued on the next page)
Track number Playback time
Total track number Total playback time
PROGRAM
PROGRAM
FS-SD1000_01E.book Page 15 Wednesday, May 9, 2001 10:30 AM