22
English
FS-SD1000(UB, US, UW, UY) / LVT0685-002A / English
Troubleshooting

If you are having a problem with your System, check this

list for a possible solution before calling for service. If you cannot solve the problem from the hints given

here, or the System has been physically damaged, call a

qualified person, such as your dealer, for service.

Symptom Possible Cause Action
No sound is heard. Connections are incorrect, or loose.
Headphones are connected.
Check all connections and make correc-
tions. (See pages 4 to 8.)
Disconnect the headphones.
Poor radio reception The antenna is disconnected.
The AM Loop Antenna is too close to the
System.
The FM Wire Antenna is not properly
extended and positioned.
Reconnect the antenna securely.
Change the position and direction of the
AM Loop Antenna.
Extend FM Wire Antenna to the best
reception position.
The CD skips. The CD is dirty or scratched. Clean or replace the CD.
The CD does not play. The CD is upside down. Put the CD in with the label side up.
Unable to operate the Remote Control. The path between the Remote Control
and the sensor on the Unit is blocked.
The batteries have lost their charge.
Remove the obstruction.
Replace the batteries.
Operations are disabled. The built-in microprocessor has malfunc-
tioned due to external electrical interference. Unplug the System then plug it back in.
"NO DISC" or "0:00" appears.
There is no disc in the tray, or CD, CD-R or
CD-RW that hasn’t yet been finalized (in-
cluding blank discs) has been inserted.
Insert a CD, CD-R or CD-RW that has been
finalized.
Subwoofer automatically turns on, but no
sound is output. The volume knob of the Subwoofer is set to
MIN position. Adjust the volume knob.
Subwoofer does not automatically turn on. The volume knob of the Subwoofer is set to
MIN position. Also, the volume level of the
Unit is low.
Adjust both volume levels.
FS-SD1000_01E.book Page 22 Wednesday, May 9, 2001 10:30 AM