Daily Maintenance

Be sure to turn off the power and detach the cables before performing any maintenance.

Wipe this unit with a dry, soft cloth to remove any dirt.

When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent.

CAUTION

Camcorder

•Do not use benzene or thinner. (Cause of damage to or

 

 

malfunction of the unit)

 

•When using a chemical cloth or other products, be sure to observe

 

the instructions of the product.

 

•Do not leave the device in contact with rubber or plastic products

 

for a long time.

Lens/LCD Monitor

Use a lens blower (commercially available) to remove any dust, and a cleaning cloth (commercially available) to wipe off any dirt. (Mold may form if the lens is left dirty.)

Perform [TOUCH SCREEN ADJUST] (P.45) if the reactive area of the screen is misaligned with the touched area.

(Adjust by lightly tapping with a corner of an SD card, etc. Do not press with an object with a sharp tip or do not press hard.)

See page 27 for maintenance after recording in water. (GC-WP10 only)

5