Attaching the covers

●Attach the HDMI cover (3) and AC terminal cover (5) after connections have been made. Fix the HDMI cover to the unit using the supplied screw. Break off the bottom right of the HDMI cover when you want to extend the HDMI cable backwards.

●Attach the D-sub cover (1), hook hole covers (2) and bottom covers (4) when the respective openings are not in use.

1

2

1

3

2 2

4

5

3

4

4

5

Attaching the speaker unit

Connect the speaker unit (TS-C32SPG: sold separately) to the monitor if you do not connect any other external audio output device.

●Set the volume to the minimum level and turn the power off before you attach the speaker unit to the monitor.

●Refer to the startup sheet for details.

Installation

Install the unit properly referring to the cautions from pages ii to vii.

●Attach the stand (supplied) to stand the monitor. Refer to the startup sheet for details.

●Attach the VESA bracket using the supplied screws when installing the monitor on the wall. Refer to the startup sheet for details. Consult a specialist when you install the monitor on the wall.

Installation

05