JVC GD-V422PCE Setting RGB sync signal:, Displays the H (Horizontal) / V (Vertical) frequencies, Sync, H-Freq.(kHz) / V-Freq.(Hz)

15 - 110 kHz

48 - 120 Hz

Setup for input signals

Sync

Select Signal from the “Setup” menu during RGB input signal.

	Setup	1/2
Press to adjust.	Component/RGB-in select
		RGB
	Input label	RGB1
	Signal
	Screensaver
	Power save	Off
	Standby save	On
	Power management	Off
	OSD Language	English (UK)
	Press	(ACTION) button
R
Press to exit from adjust mode.	Signal	[ RGB ]
	Sync	H & V

H-Freq. 31.5 kHz

V-Freq. 60.0 Hz

Setting RGB sync signal:

Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).

H & V:	The H and V sync signals are input from the HD / VD connector.
on G:	Uses a synchronized signal on the Video G signal, which is input
	from the G connector.
CS:	Uses a synchronized signal of Composite Sync input.

Sync	H & V
Sync	on G

SyncCS

H-Freq. (kHz) / V-Freq. (Hz)

Displays the H (Horizontal) / V (Vertical) frequencies.

This display is valid only for RGB input and PC input signals. Display range:

Horizontal Vertical

H-Freq. 31.5 kHz V-Freq. 60.0 Hz

32