12
ENGLISH
1
Press and hold SEL for more than 2
seconds.
“CLOCK H”, “CLOCK M”,
“SCM LINK”, “LEVEL”,
“B.SKIP” or “EXT IN*”
appears on the display.
★Displayed only when one of the following sources is
selected—FM, AM and TAPE.
2
Select “SCM LINK” if not shown on the
display.
3
Select the desired mode — “LINK ON”
or “LINK OFF”.
4
Finish the setting.
Storing your own soundadjustments
You can adjust the sound modes (BEAT, SOFT,
POP: see page 11) as you like and store your own
adjustments in memory.
1
Call up the sound mode you want to
adjust.
See page 11 for details.
Within
5 seconds
2
To adjust the bass or treble sound
level
Select “BAS” or “TRE.”
Within
5 seconds
3
Adjust the bass or treble level.
See page 10 for details.
To turn on or off the loudness function
Each time you press LOUD,
the loudness function turns
on and off alternatively.
Within
5 seconds
4
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your setting is stored in memory.
5
Repeat the same procedure to store
other settings.

To reset to the factory settings

Repeat the same procedure and reassign the preset
values listed in the table on page 11.
EN10-12KS-FX611[U]-9 11/1/01, 3:17 PM12