23
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.

Symptoms

•A cassette tape cannot be
inserted.
•Cassette tapes become hot.
•Tape sound is at very low
level and sound quality is
degraded.
•Sound is sometimes
interrupted.
•Sound cannot be heard from
the speakers.
•SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
•Static noise while listening
to the radio.
•“NO CD” or “NO DISC”
appears on the display.
•“RESET 8” appears on the
display.
•“RESET 1-RESET 7”
appears on the display.
•The unit does not work at
all.
•The CD changer does not
work at all.

Causes

You have tried to insert a
cassette in the wrong way.
This is not a malfunction.
The tape head is dirty.
Connections are not good.
The volume control is turned
to the minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected
firmly.
No CD is in the magazine.
CDs are inserted incorrectly.
This unit is not connected to a
CD changer correctly.
The built-in microcomputer
may function incorrectly due
to noise, etc.

Remedies

Insert the cassette with the
exposed tape facing right.
Clean it with a head cleaning
tape.
Check the cords and
connections.
Adjust it to the optimum level.
Check the cords and
connections.
Store stations manually.
Connect the antenna firmly.
Insert CDs into the magazine.
Insert them correctly.
Connect this unit and the CD
changer correctly and press
the reset button of the CD
changer.
Press the reset button of the
CD changer.
Press and SEL at
the same time for more than 2
seconds to reset the unit. (The
clock setting and preset
stations stored in memory are
erased.) (See page 2).
EN20-24KS-FX611[U]-9 11/1/01, 3:19 PM23