25
ENGLISH
EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
Before operating the external component using the
following procedure, select the external input
correctly. See “To select the external component to
use—EXT IN” on page 19.
1
Select the external component
(LINE IN).
If “LINE IN”* does not appear on the display,
see page 19 and select the external input
(“LINE IN”).
*Displayed only when one of the following sources is
selected—FM, AM, and TAPE.
Note on One-Touch Operation:
When you press TAPE (CD-CH), the power
automatically comes on. You do not have to press
to turn on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics you
want. (See pages 16 and 17.)
TAPE LINE IN
EN25-25_KS-FX771[U]f.p65 3/11/03, 10:37 AM25