9
ENGLISH
Searching a station manually:Manual search
1
Select the tuner as the source.
• The last selected station is tuned in.
2
Select the band (FM1 – 3, AM) if
neccessary.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
3
Press and hold ¢ or 4 until
“M (manual)” starts flashing on the
display.
4
Tune in to a station you want while “M”
is flashing.
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM) until you release
the button.

When an FM stereo broadcast is hard to

receive:

Press MO RND (monaural/random) while
listening to an FM stereo broadcast.
• Each time you press the button, the MO
indicator lights up and goes off alternately.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved (the ST indicator
goes off).
To restore the stereo effect, press the same
button again.
To tune in to stations of
higher frequencies.
Tuner
(FM1 – 3, AM)
CD
TUNER
To tune in to stations of
lower frequencies.
5BAND

FM1 FM2 FM3

AM

Selected band appears.
Lights up when receiving an
FM broadcast in stereo
RND
MO
EN08-11.KD-S845[U]f 1/28/03, 11:55 AM9