EN15
RECORDING
DANGER
nThe video light can become extremely
hot. Do not touch it either while in
operation or soon after turning it off,
otherwise serious injury may result.
nDo not place the camcorder into the
carrying case immediately after using the
video light, since it remains extremely
hot for some time.
nWhen operating, keep a distance of
about 30 cm (11-13/16") between the
video light and people or objects.
nDo not use near flammable or explosive
materials.
nIt is recommended that you consult your
nearest JVC dealer for replacing the video
light.
LIGHT OFF/AUTO/ON Switch
FEATURE:
Video Light
PURPOSE:
To brighten the scene when natural lighting is too dim.
OPERATION:
Set LIGHT OFF/AUTO/ON as required:
OFF : Turns off the light.
AUTO : Automatically turns on the light when the
camcorder senses insufficient lighting on the
subject.
ON : Always keeps the light on as long as the
camcorder is turned on.
nThe video light can only be used with the
camcorder’s power on.
nIt is recommended to set the white balance
(Z pg. 28) to when you use the video light.
nWhen not using the video light, turn it off to save
battery power.
NOTES:
●
Even if the battery indicator ( ) does not blink
due to low battery charge, the camcorder may turn
off automatically when you turn on the video light,
or when you start recording with the video light
turned on.
●
When LIGHT OFF/AUTO/ON is set to “AUTO”:
•
Depending on the lighting conditions, the video
light may keep turning on and off. In this case,
manually switch the light on or off using LIGHT
OFF/AUTO/ON.
•
While the “SHUTTER” mode (
Z
pg. 24) is
engaged, the light is likely to stay on.
•
While the “TWILIGHT” mode (
Z
pg. 24) is
engaged, the light will not activate.