JVC GR-DVF31 Advanced Connections Connection To A Personal Computer

34 EN
PLAYBACK Advanced Connections
Connection To A Personal
Computer
This camcorder can transfer still images to a PC by using
the provided software when connected as shown in the
illustration. It is also possible to transfer still images to a PC
with a DV connector-equipped capture board installed.
1
Make sure the camcorder and PC are turned off.
2
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3
Turn the camcorder’s Power Switch to “ ” and
turn on the PC.
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
( Z pg. 7).
● Never connect the PC connection cable and the DV
cable simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
● The date/time information cannot be captured into the
PC.
● Refer to the instruction manuals of the provided
Software.
● Also refer to the manufacturer’s instruction manual for
the DV connector-equipped capture board.
To DV
IN/OUT
To RS-232C
DV cable
(optional)
To DV
connector
PC connection
cable (provided)
To PC
Power Switch
PC with DV
connector-equipped
capture board PC
*When connecting cables, open this cover.
Connector cover*