10
ENGLISH
RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.

Searching a station automatically:

Auto search

1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start searching for a station.
To search stations of lower frequencies
When a station is received, searching stops.
To search stations of
higher frequencies
Selected band appears.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
FM 1 FM 2 FM 3 A M
To stop searching before a station is received,
press the same button you have pressed for
searching.

Searching a station manually:

Manual search

1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Press and hold ¢ or 4
until “M” (manual) starts flashing on
the display.
FM 1 FM 2 FM 3 A M
EN10_12_KD_SC605[U].P65 9/24/03, 4:40 PM10