JVC KD-G614, GET0305-001A, KD-G514 manual Adjusting the sound, To do Range

Adjusting the sound

You can adjust the sound characteristics to your preference.

1

* Only for KD-G614.

Ex.: When “TRE” is selected

2

Indication pattern changes as you adjust the level.

Indication	To do:	Range
BAS*1	Adjust the bass.	–06 (min.)
(bass)		to
		+06 (max.)
TRE*1	Adjust the treble.	–06 (min.)
(treble)		to
		+06 (max.)
FAD*2	Adjust the front	R06
(fader)	and rear speaker	(Rear only)
	balance.	to
		F06
		(Front only)
BAL	Adjust the left	L06
(balance)	and right speaker	(Left only)
	balance.	to
		R06
		(Right only)
LOUD*1	Boost low and	LOUD ON
(loudness)	high frequencies	J
	to produce a well-	LOUD OFF
	balanced sound at
	low volume level.
SUB. W*3	Adjust the	00 (min.) to
(subwoofer)	subwoofer output	08 (max.)
	level.
VOL*4	Adjust the	00 (min.) to
(volume)	volume.	30 or 50
		(max.)*5

*1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including “USER.”

*2 If you are using a two-speaker system, set the fader level to “00.”

*3 Only for KD-G614: This takes effect only when a subwoofer is connected.

*4 Normally the control dial works as the volume control. So you do not have to select “VOL” to adjust the volume level.

*5 Depending on the amplifier gain control setting. (See page 21 for details.)

19