Menu item

SUB.W LPF*10

 

SUB.W LEVEL*10

AUDIO

HPF
BEEP

 

 

TEL MUTING*11

 

AMP GAIN*12

 

SSM

 

AREA

TUNER

MONO

 

IF BAND
IPOD SWITCH*13

SELECT

AM*14

R-AUX*14

 

F-AUX*14

SRC

 

 

 

Selectable setting, [Initial: Underlined]

LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.

00 — 08 [ 04 ] : Adjusts the subwoofer output level.

ON : Activates the High Pass Filter. The unit selects the cutoff frequency to the rear

speakers. / OFF : Deactivates (all signals are sent to the rear speakers).

ON / OFF : Activates or deactivates the keypress tone.

ON : Mutes the sounds while using the cellular phone (not connected through

KS-BTA100). / OFF : Cancels.

LOW POWER : VOLUME 00 – VOLUME 30 (Selects if the maximum power of each speaker is less than 50 W to prevent damaging the speakers.) / HIGH POWER : VOLUME 00 – VOLUME 50

Displayed only when the source is “FM.” For settings, see page 7.

US : When using in North/Central/South America. AM/FM intervals are set to

10 kHz/200 kHz. / EU : When using in any other areas. AM/FM intervals are set to

9 kHz/50 kHz (50 kHz during auto search). / SA : When using in South American countries where FM interval is 50 kHz. AM interval is set to 10 kHz.

Displayed only when the source is “FM.” For settings, see page 7.

AUTO : Increases the tuner selectivity to reduce interference noises between adjacent

stations. (Stereo effect may be lost.) / WIDE : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain.

HEAD MODE : Controls iPod playback through the unit. / IPOD MODE : Controls

iPod playback through the iPod/iPhone. / EXT MODE : The sound of any functions (musics, games, applications, etc.) running on the connected iPod/iPhone is emitted through the speakers connected to this unit. The display always show “EXT MODE.”

ON / OFF : Enable or disable “AM” in source selection.

ON / OFF : Enable or disable “F-AUX” in source selection.

ON / OFF : Enable or disable “R-AUX” in source selection. / BT ADAPTER : Selects if the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100. (page 9) The source name changed to “BT AUDIO.”

*10 For KD-R528/KD-R520/KD-R428/KD-R420: Displayed only when <L/O MODE> is set to <SUB.W>. *11 This setting does not work if <BT ADAPTER> is selected for <R-AUX> of the <SRC SELECT>.

*12 The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level set higher than “VOLUME 30.”

*13 For KD-R528/KD-A525/KD-R520: Displayed only when “USB-IPOD” is selected.

*14 Displayed only when any source other than “AM/ F-AUX/ R-AUX/ BT AUDIO” is selected separately.

ENGLISH 15