Configuring your remote control
You can configure your TV’s remote control to operate your other devices.
Configure your remote control.
1.
2.Switch the remote control mode that matches
your device. Refer to the table on the right to select an appropriate mode.
TV 
STB
AUDIO 
BD/DVD
• The indicator lights for 3 seconds each time the remote control is operated.
3.Find the remote control code for your device
according to its brand from the “Remote control codes” manual.
4. Set the remote control code.
Press and hold Enter four digit | Release the |
number | button |
5. Point the remote control at your device, press
and confirm that your device is turned off. If your device does not respond, try entering another available code.
Note
•If your device does not respond, try all the available codes for the device’s brand.
•If none of the code works, or the brand is not listed, refer to “Using the search code function” (P. 14).
MODE | Applicable devices |
TV | This TV only |
|
|
STB | Cable Set Top Box, Cable/PVR Combination, |
| Satellite Set Top Box, SAT/PVR Combination |
|
|
BD/DVD | DVD, |
| Theater in Box, TV/DVD Combination |
|
|
AUDIO | Amplifier, Receiver, Home Theater in Box |
|
|
13
