JVC GR-AX1010 manual Jlip ID no

MAIN MENU			31
Shift Zoom		OFF	Disables the Shift Zoom function.
	♦50x		Magnifies wide-angle images to approximately 3.6 times the
			original size, and enables zooming in the 18x – 50x range.
	♦140x		Magnifies wide-angle images to approximately 10 times the
			original size, and allows zooming from 50x to 140x.
Tele Macro		OFF	Usually set to this position.
	♦ON		Usually the distance to a subject where the lens is in focus
			depends on the zoom magnification. Unless there is a
			distance more than 1m to the subject, the lens is out of focus
			at the maximum telephoto setting. When set to “ON”, you
			can shoot a subject as large as possible at a distance of
			approx. 60 cm.
			•Depending on the zoom position, the lens may go out of
			focus.
Gain UP		AGC	Allows you to record a subject in a dark environment. It
			delivers a brighter, if slightly coarse, picture.
	♦ A		(Auto Slow Shutter) Combines AGC with electronic shutter
			speed (1/30 to 1/60) for shooting under much darker
			conditions. When shooting in poorly lit areas, or when
			shooting a dark subject in dim lighting, the unit will
			automatically enter the Auto Slow Shutter mode, reducing
			the shutter speed to 1/30 sec. Although the resulting picture
			will be similar to that obtained when using Strobe (☞ pg. 27),
			the image will be clear with less noise.
	♦OFF		Allows you to shoot dark scenes with no picture brightness
			adjustment.
Color Filter		NOR	For normal shooting with no color adjustment.
	♦RED		Gives recording a reddish tint.
	♦BLUE		Gives recording a bluish tint.
Tape Length	Allows you to set the tape length depending on the tape used (☞ pg. 12).
Title	Allows you to superimpose a preset title onto a scene (☞ pg. 32).
Date/Time	Allows you to set the current date and time (☞ pg. 11).
SUB MENU		= Factory setting
Tally		ON	The tally lamp comes on to signal the start of recording.
		OFF	The tally lamp remains off at all times.
Interval Timer and	These features allow you to set the parameters for Self-Timer
Rec. Time	(☞ pg. 34), Animation and Time-Lapse recording (☞ pg. 35).
JLIP ID NO.	This number will be necessary in the future when connecting the
	camcorder to a device such as a computer using the JLIP terminal.
	The numbers range from 01 — 99.

NOTES:

●When the video light’s LIGHT ON/AUTO/OFF switch is set to “ON” or “AUTO”, Auto Slow Shutter is disabled.

●When Auto Slow Shutter is activated, Auto Focus may not work properly.