22
RECORDING
Advanced Features (cont.)Date/Time Character Insert
This feature allows you to display date, time and characters
in your viewfinder and on a connected colour monitor,
record them manually or automatically, and even make
your own titles.
NOTE:
You should already have performed the Date/Time
Setting procedure (
Z
pg. 9). If you haven’t, do so before
continuing.

DISPLAY

SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.

SELECT DISPLAY

2
Press SELECT repeatedly until “ DISP. ” appears.

CHOOSE DISPLAY MODE

3
Press SET while in Record–Standby to cycle through
the modes as shown in the illustration at left.
NOTES:
●
The selected display can be recorded.
●
If you don’t want to record the display, select Date-off
mode before shooting.
●
If you want to delete the display during shooting, press
SET.
●
If you want to call back a deleted display, engage the
Record–Standby mode and then select the desired
display mode using SET.

AUTO DATE RECORD

Your camcorder automatically records the day, month
and year for about 5 seconds after recording is initiated
in the following situations:
•After changing the date.
•After loading a cassette.
•After Auto Date Record mode is selected by pressing
SET. In this mode, the day, month and year are replaced
after 5 seconds with “AUTO DATE”.
NOTES:
●
Setting PROGRAM AE to LOCK always engages this
mode, and disables all other modes.
●
In the Auto Date Record mode, if the date changes
while you’re shooting, the date indication is recorded for
about 5 seconds from that point. It is not recorded
during any other recordings made on that day.
DISP.
Auto Date Record mode Date display
Date/Time displayCharacter Generator
Date-off mode
25.12.97 25.12.97
AUTO DATE
Date display Auto Date Record mode
Date/Time display
Character Generator
Auto date
record mode Auto date
record executed
No Characters
stored
Example of
stored characters
IN PARIS, FRANCE
25.12.97 10:45
SET CHAR
SELECT
SET
PROGRAM AE
select dial