45
ertyiEWRT YwpQuOUIoConnectors
wJ terminal (JLIP (Joint Level Interface Protocol)
Connector.)
(Located beneath the jack cover)
•Connect the Editing Cable when performing
Random Assemble Editing (Z pg. 34).
•It is used to connect the camcorder to a device
such as a personal computer.
For further detail consult your nearest JVC
dealer.
Information (in English) is also availble at our
home page: http://www.jvc-victor.co.jp/
eDC IN Jack......................................... Z pg. 7
The jacks r to y are located beneath the jack
cover.
rVIDEO OUT Jack............................... Z pg. 29
tRF DC OUT Jack................................ Z pg. 29
yAUDIO OUT Jack.............................. Z pg. 29
Indicators
uTally Lamp ......................................... Z pg. 12
iPower On Indicator ........................... Z pg. 12
Other Parts
oVideo Light ........................................ Z pg. 15
p•Camera sensor
Be careful not to cover this area; built-in
here is the sensor necessary for shooting.
•Remote sensor ................................. Z pg. 37
QMicrophone ....................................... Z pg. 39
WShoulder Strap Eyelets........................ Z pg. 11
EClock Battery Compartment................ Z pg. 8
RBattery Pack Mount ........................... Z pg. 6
TElectronic Viewfinder......................... Z pg. 8
YLENS COVER Switch ......................... Z pg. 12
UGrip Strap .......................................... Z pg. 11
IVIDEO LIGHT ON/AUTO/OFF
Switch................................................ Z pg. 15
OTripod Mounting Socket...................... Z pg. 11