Quick Review (2) Button

Set to “” or “”.

EN17

Quick Review: To check the end of the last recording.

1)Make sure the camcorder is in the Record–Standby mode.

2)Press 2and release quickly.

Tape is rewound for approx. 2 seconds and played back automatically, then pauses in Record–Standby mode for the next shot.

●Distortion may occur at the start of playback. This is normal.

RETAKE (2/3) Button

Set to “” or “”.

Retake: To re-record certain segments.

1)Make sure the camcorder is in the Record–Standby mode.

2)Press and hold either RETAKE to reach the start point for new recording. Pressing 3forwards the tape and pressing 2reverses it.

3)Press the Recording Start/Stop Button to start recording. ● Noise bars appear and pictures may become mono-

chrome or darken during Retake. This is normal.

5 SEC. REC Button

Set to “” or “”.

5Sec. Rec (5-Sec. Recording):

To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programs.

1)Make sure the recording mode is set to “SP”.

2)During Record–Standby, press 5 SEC. REC. “ 5S” appears and 5Sec. Rec is reserved.

3)Press the Recording Start/Stop Button. Recording starts, and after 5-second recording is finished, the camcorder reenters the Record–Standby mode automatically.

4)To cancel the 5Sec. Rec. function, press 5 SEC. REC again so that “ 5S” disappears.

●Fade/Wipe ( pg. 19) cannot be activated by pressing 5 SEC. REC.