AHook on.
B Push in.
BATTERY RELEASE Switch
ATTENTION:
Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.
EN9
USING THE BATTERY PACK
Hook its end to the camcorder 
and push the battery pack in until it locks in place 
.
•If the battery pack is attached in the wrong position, a malfunction may occur.
To Detach The Battery Pack . . .
.... slide BATTERY RELEASE and pull out the battery pack.
Battery pack | Approximate recording time |
|
|
1 hr. 40 min. | |
|
|
1 hr. 40 min. | |
|
|
2 hrs. 45 min. | |
|
|
10 hrs. 50 min. | |
|
|
NOTES:
●Recording time is reduced significantly under the following conditions:
• Zoom or
●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.
INFORMATION:
It is impossible to charge the
To DC IN | To AC outlet |
connector | |
| To DC OUT |
| connector |
Core
filter
AC Power
Adapter/ DC Cord Charger
AA-V16U
To car’s cigarette lighter
Car Battery Cord socket
Car Battery
Charger/Adapter
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in the illustration).
NOTES:
●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.
●For other notes, ☞ pg. 8.
USING A CAR BATTERY
Use the optional Car Battery Cord or Car Battery Charger/ Adapter (connect as shown in the illustration).
NOTES:
●When using the car battery, leave the engine idling.
●The optional Car Battery Charger
●When using the optional Car Battery Charger or Car Battery Cord
