22
EN
[Ex. : Fader]
RECORDING
Fade/Wipe
Advanced
Features
(cont.)
Fade-in
Fade-out
Function indication
4EFFECT
These effects let you make
ENGAGE FADE- OR WIPE-
STANDBY MODE
1 Press EFFECT to cycle through the modes as shown to the left. Once the desired mode appears, it is selected and reserved.
MOSAIC
After 2 sec.
•The selected mode’s name and its indication are displayed for approx. 2 seconds. Then the name disappears, and only the indication remains.
START OR END RECORDING
LCD monitor or viewfinder
BK |
|
| BK FADER |
| ||||
|
|
| ||||||
|
|
|
|
|
| MOSAIC | ||
|
|
|
|
|
| |||
|
|
|
|
|
| SHUTTER | ||
|
|
|
|
|
| |||
|
|
|
|
|
| SLIDE | ||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
OFF |
|
| OFF |
|
| |||
|
|
|
| |||||
(No indication) |
|
|
|
| ||||
2 Press Recording Start/Stop Button to activate
TO CANCEL FADE- OR WIPE- STANDBY MODE
3 Press EFFECT repeatedly until “OFF” appears.
•“OFF” is displayed for approx. 2 seconds and the
BK FADER
Fades in/out to a black screen.
MOSAIC (Fader)
Gradually turns/returns the picture into/from a mosaic pattern.
SHUTTER (Wipe)
A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.
SLIDE (Wipe)
A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.
EFFECT
Recording
Start/Stop
Button
NOTES:
●Pressing and holding the Recording Start/Stop Button allows you to record a black blank screen or a mosaic pattern if Mosaic Fader is selected.
●The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (☞ pg. 21).
●With the Electronic fog filter mode (☞ pg. 21) engaged, when Fader (not Mosaic) is used, the image fades in/out to a white screen.
