IMPORTANT PRODUCT SAFETY INSTRUCTIONS

Electrical energy can perform many useful func- tions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your product and its operating instruc- tions. For your safety, please read all the safety and operating instructions before you operate this product and keep this manual for future reference.

INSTALLATION

1. Grounding or Polarization

(A)Your product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

(B)Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

EN3

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

•Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

•Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

ANTENNA INSTALLATION

INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN WIRE

GROUND CLAMP

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed

ELECTRIC SERVICE EQUIPMENT

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

Page 2 Page 4
Page 3
Image 3
JVC GR-AXM900 manual Antenna Installation Instructions
Page 2 Page 4

GR-AXM900 specifications

The JVC GR-AXM900 is a noteworthy camcorder that emerged in the early 1990s, embodying the evolution of home video recording technology during that era. This compact and lightweight camcorder is designed for amateur videographers, offering a range of features that cater to a variety of filming needs.

One of the standout features of the GR-AXM900 is its 680,000-pixel CCD sensor, which provides a clear and vibrant image quality for its time. This sensor enables users to capture video in 4:3 aspect ratio, making it suitable for traditional television viewing. The camcorder also supports S-VHS recording, which delivers higher quality video compared to standard VHS formats. This capability is ideal for users looking to create videos with improved resolution and color depth.

The GR-AXM900 boasts a powerful zoom lens, featuring a 10x optical zoom that allows users to focus on subjects from a distance without sacrificing image quality. Additionally, it offers a 700x digital zoom, enabling even greater magnification when needed, making it a versatile tool for capturing a range of scenes, from close-ups to distant landscapes.

User convenience is enhanced by the camcorder’s sophisticated autofocus system. The autofocus feature helps ensure that subjects are sharp and in focus, which is especially useful for novice filmmakers who may be learning the ins and outs of manual focusing. The camera also includes several shooting modes, allowing users to easily switch between standard recording and various special effects.

Another notable characteristic of the JVC GR-AXM900 is its capability to record audio with built-in stereo microphones, providing a richer sound quality that complements the video footage. Furthermore, the camcorder comes equipped with a color viewfinder and a flip-out LCD screen, giving users a clear view of their subject while recording.

The design of the GR-AXM900 is user-friendly, with controls positioned for easy access, allowing for smooth operation during shooting. It is powered by rechargeable batteries, contributing to its portability and ease of use for extended filming sessions.

In summary, the JVC GR-AXM900 was a significant advancement in consumer camcorder technology, providing impressive features for capturing high-quality video. Its combination of S-VHS recording, versatile zoom capabilities, autofocus, and user-friendly design make it a memorable choice for amateur filmmakers of its time.
Top Page Image Contents