Connect the AC Adapter to the camcorder.

 

 

 

 

GETTING STARTED

EN 11

How To Attach The Shoulder Strap

 

 

 

 

 

 

 

Power

 

 

Follow the illustration.

 

 

 

 

 

 

 

This camcorder’s 2-way power supply system

1 Thread the strap through the eyelet.

 

 

lets you choose the most appropriate source of

2 Fold it back and thread it through the strap

 

power. Do not use provided power supply units

guide and the buckle.

 

with other equipment.

● To adjust the length of the strap, loosen and then

 

Charging The Battery Pack

tighten the strap in the buckle.

 

 

 

 

 

 

 

3 Slide the strap guide fully towards the eyelet.

Buckle

Strap guide

2 2

1

3

 

Eyelet

 

Power switch

M A

POWER/CHARGE lamp

POWER/

CHARGE

Battery pack mount

PUSH BATT.

Battery pack

Arrow

mark To DC connector

Open the cover.

To AC outlet

AC Adapter (ex. AP-V17E)

1 Set the Power Switch to “OFF”.

2 With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount a.

3 Slide down the battery pack until it locks in place b.

4

5 Connect the Power Cord to the AC Adapter. (AP-V14E only)

6 Plug the AC Adapter into an AC outlet. The POWER/CHARGE lamp on the camcorder blinks to indicate charging has started.

7 When the POWER/CHARGE lamp goes out, charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder.

CONTINUED ON NEXT PAGE