EDITING EN 35

Dubbing To A VCR

To S/AV connector

 

S/AV cable

Open the cover.

mark

(provided)

1 2 3 4

“Y/C”/“CVBS”

Cable Adapter

(optional)*

Video Out Select

Switch

 

To VCR

TV

 

VCR

 

1 Following the illustrations, connect the camcorder and the VCR’s input connectors.

2 Start playback on the camcorder. ( pg. 20)

3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)

●To choose whether or not the following displays appear on the connected TV

•Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 22, 27)

•Time code

Set “TIME CODE” to “OFF” or “ON”. ( pg. 22, 27)

•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/ TV”. ( pg. 22, 27)

ATo S-VIDEO IN**

BYellow to VIDEO IN

CRed to AUDIO R IN

DWhite to AUDIO L IN

*If your VCR has a SCART connector, use the cable adapter (optional).

**Connect when your TV/VCR has an S-VIDEO IN connector. In this case, it is not necessary to connect the yellow video cable.

NOTE:

Set the video out select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable. CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/ video cable.