GETTING STARTED EN 13

Using AC Power

Operation Mode

 

Perform steps 4 – 5 in “Charging The Battery

To turn on the camcorder, set the Power Switch

Pack”.

to any operation mode except “OFF” while

NOTE:

pressing down the Lock Button located on the

The provided AC Adapter features automatic

switch.

 

voltage selection in the AC range from 110 V to

MENU/DATA

Power Switch

240 V.

 

Lock Button

About Batteries

 

 

 

DANGER! Do not attempt to take the batteries

 

 

apart, or expose them to flame or excessive

 

M A

heat, as it may cause a fire or explosion.

 

POWER/

WARNING! Do not allow the battery or its

 

 

CHARGE

terminals to come in contact with metals, as this

 

POWER/

can result in a short circuit and possibly start a

 

CHARGE lamp

fire.

 

 

To resume the original function of the

Choose the appropriate operation mode

accurate battery power indication

If the battery power indication differs from the

according to your preference using the Power

actual operating time, fully charge the battery,

Switch.

 

and then run it down. However this function may

Power Switch Position

not turn back if the battery was used for a long

 

 

period of time under extremely high/low

A (Full Auto Recording):

 

temperature condition or charged too many

Allows you to record using NO special effects

times.

or manual adjustments. Suitable for standard

 

recording.

 

 

The “A” indicator appears on the display.

 

M (Manual Recording):

 

 

Allows you to set various recording functions

 

using the Menus. ( pg. 22)

 

If you want more creative capabilities than Full

 

Auto Recording, try this mode.

 

OFF:

 

 

Allows you to switch off the camcorder.

 

PLAY:

 

 

● Allows you to play back a recording on the

 

tape.

 

 

● Allows you to set various playback functions

 

using the Menus. ( pg. 22)

CONTINUED ON NEXT PAGE