|
|
|
|
|
|
| MENUS FOR DETAILED ADJUSTMENT | EN 17 | |||
|
|
|
|
|
|
|
|
|
|
| |
this mode, refer to your |
|
|
| CAMERA DISPLAY | |||||||
|
|
| |||||||||
manual. During playback/recording on 4:3 TVs/LCD |
|
|
|
|
|
| |||||
| ● The “n” (CAMERA DISPLAY) settings are effective even | ||||||||||
monitor/viewfinder, the image is elongated vertically. |
| ||||||||||
| when the Power Switch is set to “A”. However, the menu | ||||||||||
|
|
|
|
|
|
| |||||
WIND CUT |
|
|
| settings can be changed only when the Power Switch is set | |||||||
[OFF]: Disengages the function. |
| to “M”. | |||||||||
| ● The “n” (CAMERA DISPLAY) settings are effective only | ||||||||||
ON | : Helps cut down on noise created by wind. The |
| for shooting except “BRIGHT”. | ||||||||
“ |
| ” indicator appears. The quality of the sound will |
| [ ] = | |||||||
| change. This is normal. |
|
|
|
|
|
| ||||
|
|
|
|
| SYSTEM |
| BRIGHT |
|
| ||
|
|
|
|
|
| ||||||
|
|
|
|
|
|
| |||||
The “s” functions which are set when the Power Switch |
|
|
|
|
|
| |||||
| ON SCREEN |
|
| ||||||||
is set to “M” are also applied when the Power Switch is |
|
| |||||||||
set to “PLAY”. |
| LCD: Keeps the camcorder’s display (except the date, | |||||||||
[ ] = |
| time and time code) from appearing on the connected TV | |||||||||
|
|
|
|
|
|
| screen. | ||||
BEEP |
|
|
| ||||||||
|
|
|
| [LCD/TV]: Makes the camcorder’s display appear on | |||||||
OFF: Turns off sounds when performing any operations. |
| screen when the camcorder is connected to a TV. | |||||||||
It also deactivates the shutter sound effect, however the |
|
|
|
|
|
| |||||
| DATE/TIME |
|
| ||||||||
shutter sound is recorded onto the tape during Snapshot |
|
| |||||||||
| OFF: The date/time does not appear. | ||||||||||
BEEP: The beep sounds when the power is turned on or |
| [AUTO]: Displays the date/time for approx. 5 seconds | |||||||||
off, and at the beginning and end of recording. It also |
| when the Power Switch is set from “OFF” to “A” or “M”. | |||||||||
| ON: The date/time is always displayed. | ||||||||||
[MELODY]: Instead of a beep, a melody sounds when |
|
|
|
|
|
| |||||
| TIME CODE |
|
| ||||||||
any operation is performed. It also activates the shutter |
|
| |||||||||
| [OFF]: Time code is not displayed. | ||||||||||
|
|
|
|
|
|
| ON: Time code is displayed on the camcorder and on the | ||||
DEMO MODE |
|
| |||||||||
|
|
| connected TV. Frame numbers are not displayed during | ||||||||
OFF: Automatic demonstration will not take place. |
| ||||||||||
| |||||||||||
[ON]: Demonstrates certain functions such as Program |
|
|
|
|
|
| |||||
| CLOCK ADJ. |
|
| ||||||||
AE with special effects, etc., and can be used to confirm |
|
| |||||||||
how these functions operate. Demonstration starts in the |
| ||||||||||
following cases: |
|
|
|
|
|
| |||||
●When the Menu Screen is closed after “DEMO MODE” is turned “ON”.
●With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes after the Power Switch is set to “A” or “M”.
Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
NOTES:
●If a cassette is in the camcorder, the demonstration cannot be turned on.
●“DEMO MODE” remains “ON” even if the camcorder power is turned off.
●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.
PRIORITY
[LCD]: The image is displayed on the LCD monitor when the viewfinder is pulled out while the LCD monitor is opened.
FINDER: The image is displayed in the viewfinder when the viewfinder is pulled out while the LCD monitor is opened.
CAM RESET
EXECUTE: Resets all settings to the
RETURN: Does not reset all settings to the factory- preset.