JVC GR-D320EK manual Is displayed, On The date/time is always displayed, LCD monitor is opened

		MENUS FOR DETAILED ADJUSTMENT		EN 25
shutter speed is being automatically adjusted,
			LANGUAGE
“	” is displayed.
			[ENGLISH] / FRANÇAIS / ESPAÑOL /
WIND CUT			ITALIANO / NEDERLANDS
[OFF]: Disengages the function.			The language setting can be changed.
			( pg. 15)
ON	: Helps cut down on noise created by
wind. The “ ” indicator appears. The quality of			DATE/TIME
the sound will change. This is normal.			[OFF]: The date/time does not appear.
	SYSTEM		ON: The date/time is always displayed.
The “SYSTEM” functions which are set when the			ON SCREEN
Power Switch is set to “REC” are also applied			LCD: Keeps the camcorder’s display (except the
when the Power switch is set to “PLAY”.
			date, time and time code) from appearing on the
[ ] = Factory-preset.
			connected TV screen.
			[LCD/TV]: Makes the camcorder’s display
MELODY
			appear on screen when the camcorder is
OFF: Even though not heard while shooting,
			connected to a TV.
shutter sound is recorded on the tape.
[ON]: A melody sounds when any operation is			TIME CODE
performed. It also activates the shutter sound			[OFF]: Time code is not displayed.
effect. ( pg. 27)
			ON: Time code is displayed on the camcorder
			and on the connected TV. Frame numbers are
CAM RESET
			not displayed during recording ( pg. 19).
EXECUTE: Resets all settings to the factory-
preset.			DEMO MODE
[RETURN]: Does not reset all settings to the			OFF: Automatic demonstration will not take
factory-preset.
			place.
			[ON]: Demonstrates certain functions such as
PRIORITY
			Wipe/Fader and Effect, etc., and can be used to
[LCD]: The image is displayed on the LCD
			confirm how these functions operate.
monitor when the viewfinder is pulled out while			Demonstration starts in the following cases:
the LCD monitor is opened.			● When the Menu Screen is closed after “DEMO
FINDER: The image is displayed in the			MODE” is turned “ON”.
viewfinder when the viewfinder is pulled out			● With “DEMO MODE” set to “ON”, if there is no
while the LCD monitor is opened.			operation for about 3 minutes after the Power
	DISPLAY		Switch is set to “REC”.
			● Performing any operation during the

ADVANCED FEATURES

● The menu settings can be changed only when the

demonstration stops the demonstration

Power Switch is set to “REC”.

temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will

● The DISPLAY settings except “BRIGHT” and

“LANGUAGE” are effective only for shooting.

resume.

[ ] = Factory-preset

BRIGHT

pg. 16, “Brightness Adjustment Of The Display”

CLOCK ADJ.

pg. 15, “Date/Time Settings”

NOTES:

●If a cassette is in the camcorder, the demonstration cannot be turned on.

●“DEMO MODE” remains “ON” even if the camcorder power is turned off.

●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.