34 EN
MasterPage: Heading0_Left
EDITING
AWhite to AUDIO L IN or OUT
BRed to AUDIO R IN or OUT
CYellow to VIDEO IN or OUT
DTo S-VIDEO IN or OUT*
* Connect when your TV/VCR has an S-VIDEO IN/OUT
connector. In this case, it is not necessary to connect the
yellow video cable.
To use this camcorder as a player
1Following the illustrations, connect the camcorder and
the VCR. Also refer to page 17.
2Set the camcorder’s VIDEO/MEMORY Switch to
“VIDEO”. (GR-D93/73 only)
3Set the camcorder’s Power Switch to “PLAY” while
pressing down the Lock Button located on the switch.
4Turn on the VCR’s power.
5Insert the source cassette in the camcorder.
6Insert the recording cassette in the VCR.
7Engage the VCR’s AUX and Record-Pause modes.
●Refer to the instruction manual for the VCR.
8Press 4/9 on the camcorder to start playback of the
source tape.
9At the point you want to start dubbing, engage the
VCR’s Record mode.
10To pause dubbing, engage the VCR’s Record-
Pause mode and press 4/9 on the camcorder.
11Repeat steps 8–10 for additional editing. Stop the
VCR and camcorder.
NOTES:
●It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (墌pg.7)
●As the camcorder starts to play your footage, it will appear
on your TV. This will confirm the connections and the AUX
channel for dubbing purposes.
●Before you start dubbing, make sure that the indications do
not appear on the connected TV. If they do, they are being
recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV
• Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(墌pg.25, 28) Or, press DISPLAY on the remote control
(provided with GR-D93/73 only) to turn on/off the date
indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”. (墌pg.25, 28)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(墌pg.25, 28)
To use this camcorder as a recorder (GR-D93/73
only)
1)Perform steps 1 to 3 in “To use this camcorder as a
player”.
2)Set “S/AV INPUT” to “ON”. (墌pg. 25, 28)
3)Set “REC MODE” to “SP” or “LP”. (墌pg. 25, 26)
4)Insert the recording cassette in this camcorder.
5)Press the Recording Star t/Stop Button to engage the
Record-Pause mode. The “ ” indication appears
on the screen.
6)Press the Recording Star t/Stop Button to start
recording. The T indication rotates.
7)Press the Recording Star t/Stop Button again to stop
recording. The T indication stops rotating.
NOTES:
●After dubbing, set “S/AV INPUT” back to “OFF”.
●Analog signals can be converted to digital signals with this
procedure.
●It is also possible to dub from another camcorder.
Dubbing To Or From A VCR
1234
TV
VCR
Audio/Video
cable
(provided)
To AV To S
S-Video cable
(optional)
A/V
.
IN
GR-D73US_07Advanced.fm Page 34 Thursday, November 20, 2003 1:23 PM