20 EN VIDEO PLAYBACK
Normal Playback |
| ● During playback, press and hold ¡ or 1. The | |
| search continues as long as you hold the button. | ||
¡ |
| Once you release the button, normal playback | |
VOL. +/– | resumes. | ||
| |||
6 | Lock Button | ● A slight mosaic effect appears on the display | |
1 |
| during Shuttle Search. This is not a malfunction. | |
Speaker |
| ATTENTION: | |
| During Shuttle Search, parts | ||
|
| ||
|
| of the picture may not be | |
| MENU | clearly visible, particularly on | |
| the left side of the screen. | ||
|
| ||
7 |
|
| |
1 Load a cassette. ( pg. 16) | Blank Search | ||
2 Set the Power Switch to “PLAY” while | Helps you find where you should start recording | ||
pressing down the Lock Button located on the | in the middle of a tape to avoid time code | ||
switch. |
| interruption. ( pg. 19) | |
3 To start playback, press 6. | 1 Load a cassette. ( pg. 16) | ||
4 To stop playback, press 7. | |||
2 Set the Power Switch to “PLAY” while | |||
● During Stop mode, press 1 to rewind, or ¡ to | |||
| pressing down the Lock Button located on the | ||
| switch. | ||
To control the speaker volume | |||
3 Press BLANK. | |||
Slide the Power Zoom Lever (VOL. | |||
“+” to turn up the volume, or towards | ● The “BLANK SEARCH” indication appears and | ||
the camcorder automatically starts reverse or | |||
down the volume. |
| ||
| forward search, then stops at the spot which is | ||
NOTES: |
| ||
| about 3 seconds of tape before the beginning of | ||
● The playback picture can be viewed in the LCD | the detected blank portion. | ||
monitor, viewfinder or on a connected TV. | ● To cancel Blank Search, press 7 or BLANK. | ||
( pg. 21) |
| NOTES: | |
● If Stop mode continues for 5 minutes when power | |||
● Before starting Blank Search, if the current | |||
is supplied from a battery, the camcorder shuts off | |||
position is at a blank portion, the camcorder | |||
automatically. To turn on again, set the Power | |||
searches in the reverse direction. If the current | |||
Switch to “OFF”, then to “PLAY”. | |||
position is at a recorded portion, the camcorder | |||
● When a cable is connected to the AV connector, | |||
searches in the forward direction. | |||
the sound is not heard from the speaker. | |||
● If the beginning or end of the tape is reached | |||
|
| ||
Still Playback |
| during Blank Search, the camcorder stops | |
| automatically. | ||
|
| ||
Pauses during video playback. | ● A blank portion which is shorter than 5 seconds of | ||
1) Press 6 during playback. | tape may not be detected. | ||
2) To resume normal playback, press 6 again. | ● The detected blank portion may be located | ||
● If still playback continues for more than about | between recorded scenes. Before you start | ||
recording, make sure there is no recorded scene | |||
3 minutes, the camcorder’s Stop mode is | |||
after the blank portion. | |||
automatically engaged. |
| ||
|
| ||
Shuttle Search |
| Playback Snapshot | |
Allows | This camcorder allows you to take snapshots | ||
| |||
during video playback. | during video playback. | ||
Press SNAPSHOT. | |||
1) | During playback, press ¡ for forward | ||
| |||
search, or 1 for reverse search. |
| ||
2) | To resume normal playback, press 6. |
| |