EN 13
GETTING STARTED
MasterPage: Start_Right
GETTING STARTED

How To Attach The Core Filter

Attach the core filters to the cables. The core
filter reduces interference.
1Release the stoppers on both ends of the
core filter.
2Run the cable through the core filter, leaving
approx. 3 cm of cable between the cable plug
and the core filter.
Wind the cable once around the outside of the
core filter as shown in the illustration.
3Close the core filter until it clicks shut.
NOTES:
Take care not to damage the cable.
When connecting a cable, attach the end with the
core filter to the camcorder.
Stopper
Core filter
Wind once.
3 cm
GR-D370AH_EN.book Page 13 Monday, April 17, 2006 2:24 PM