GETTING STARTED

18

EN

MasterPage: Left

1

Adjust the velcro strip.

2

Pass your right hand
through the loop and
grasp the grip.

3

Adjust your thumb and
fingers through the grip to
easily operate the
Recording Start/Stop
Button, Power Switch and
Power Zoom Lever. Be
sure to fasten the velcro strip to your preference.
1

Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.

2

Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.

3

Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
CAUTION:

When retracting the viewfinder, take care not to
pinch your fingers.

1

Set the Power Switch
to “REC” or “PLAY” while
pressing down the Lock
Button located on the
switch.

2

Open the LCD monitor
fully. (

pg. 20)

●

To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
“PRIORITY” to “FINDER”
(
pg. 32, 34).
3

Press

MENU

. The
Menu Screen appears. If
you are in Playback mode,
please proceed to step

5

.

4

Press

4

,

3

,

1

or 2 to select “DISPLAY”, and
press SET. The DISPLAY Menu appears.
5Press 4, 3, 1 or 2 to select “BRIGHT”, and
press SET. The Menu Screen closes and the
brightness control MENU appears.
6Press 4 or 3 until the appropriate brightness
is reached and press SET or 2.
7Press MENU. The menu screen closes.
To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
●Some tripods are not
equipped with studs.
Grip AdjustmentViewfinder Adjustment
Dioptre Adjustment Control
Example:
Brightness Adjustment Of The DisplayTripod Mounting
BRIGHT
– 5
11
11
22
22
MENU
44
44
33
33
GR-D370AH_EN.book Page 18 Monday, April 17, 2006 2:24 PM