24 EN VIDEO PLAYBACK

Connections To A TV Or VCR

To S connector

To AV

 

 

connector

 

 

Audio/Video

 

S Cable

 

 

(optional)

 

cable

 

 

 

 

 

(provided)

 

 

 

1

2

3

4

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration.

If using a VCR, go to step 3. If not, go to step 4.

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

6 Start playback on the camcorder. ( pg. 23)

To choose whether or not the following displays appear on the connected TV

●Date/Time

Set “DATE/TIME” to “ON” or “OFF”. ( pg. 32, 35) Or, press DISPLAY on the remote control to turn on/off the date indication.

●Time Code

Set “TIME CODE” to “ON” or “OFF”. ( pg. 32, 35)

●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 32, 35)

TV

VCR

A Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors).

B Red to AUDIO R IN* C White to AUDIO L IN*

D Black to S-VIDEO IN (Connect when your TV/ VCR/VDR has S-VIDEO in and A/V input connectors. In this case, it is not necessary to connect the yellow video cable.)

* Not required for watching still images only.

NOTE:

The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Centre described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camera. The core filter reduces interference.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 15)

●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “REC”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.