GETTING STARTED

EN 13

 

 

 

 

 

 

 

 

 

Power

 

To detach the battery pack

 

 

 

Slide the battery pack upward while pressing

 

 

 

 

 

PUSH BATT. to detach it.

This camcorder’s 2-way power supply system

 

 

 

 

 

 

lets you choose the most appropriate source of

 

Battery pack

 

Charging time

 

power. Do not use provided power supply units

 

 

 

 

 

 

 

BN-VF707U*

 

Approx. 1 hr. 30 min.

 

with other equipment.

 

 

 

 

 

 

 

 

 

Charging The Battery Pack

 

BN-VF714U

 

Approx. 2 hrs. 40 min.

 

 

 

 

 

 

 

 

BN-VF733U

 

Approx. 5 hrs. 40 min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery pack mount

 

* Provided

 

 

 

 

 

 

PUSH

Battery

 

BATT.

 

 

pack

1

 

Arrow

2

POWER/

 

CHARGE lamp

To DC connector

Power switch

AC Adapter

To AC outlet

1 Set the Power Switch to “OFF”.

2 With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount 1.

3 Slide down the battery pack until it locks in place 2.

4 Connect the AC Adapter to the camcorder.

5 Plug the AC Adapter into an AC outlet. The POWER/CHARGE lamp on the camcorder blinks to indicate charging has started.

6 When the POWER/CHARGE lamp goes out, charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder.

NOTES:

●This product includes patented and other proprietary technology and will operate only with JVC Data Battery. Use the JVC BN- VF707U/VF714U/VF733U battery packs. Using generic non-JVC batteries can cause damage to the internal charging circuitry.

●If the protective cap is attached to the battery pack, remove it first.

●During charging, the camcorder cannot be operated.

●Charging is not possible if the wrong type of battery is used.

●When charging the battery pack for the first time or after a long storage period, the POWER/ CHARGE lamp may not light. In this case, remove the battery pack from the camcorder, then try charging again.

●If a fully charged battery pack is attached to the unit, the POWER/CHARGE lamp does not blink to indicate that charging is not performed.

●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.

Please purchase a new one.

●Since the AC Adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

●Using the optional AA-VF7 Battery Charger, you can charge the BN-VF707U/VF714U/VF733U battery pack without the camcorder.

●After 5 minutes has elapsed in Record-Standby mode with the cassette inserted and no operation is performed (“PAUSE” indicator may not appear), the camcorder will automatically turn off its power supplied from the AC adapter. In this case, the battery charge starts if the battery is attached to the camcorder.

GETTING STARTED