![](/images/new-backgrounds/1248890/24889033x1.webp)
GETTING STARTED EN 17
![](/images/new-backgrounds/1248890/24889033xi2.webp)
Viewfinder Adjustment
1 Set the Power Switch to “REC” while pressing
Brightness Adjustment Of The Display
down the Lock Button located on the switch.
2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability.
3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.
Example:
1 Set the Power Switch to “REC” or “PLAY” while pressing down the Lock Button located on the switch.
2 Open the LCD monitor fully. ( pg. 19)
3
2
1 |
4 |
Diopter Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to pinch your fingers.
● To adjust the brightness of the viewfinder, pull out the viewfinder fully and set “PRIORITY” to “FINDER” MENU ( pg. 29, 31).
3 Press MENU. The
BRIGHT
Menu Screen appears. If – 5 you are in Playback mode,
please proceed to Step 5.
4 Press 3, 4, 2 or 1 to select “DISPLAY”, and press SET. The DISPLAY Menu appears.
5 Press 3, 4, 2 or 1 to select “BRIGHT”, and press SET. The Menu Screen closes and the brightness control menu appears.
6 Press 3 or 4 until the appropriate brightness is reached and press SET or 2.
7 Press MENU. The menu screen closes.
![](/images/new-backgrounds/1248890/24889033xi5.webp)
Tripod Mounting
To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise.
● Some tripods are not equipped with studs.
GETTING STARTED