MENUS FOR DETAILED ADJUSTMENT

EN 21

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback Menus

 

 

 

 

 

 

SYSTEM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Each setting is linked with “s”, which appears when the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

 

Power Switch is set to “M”. ( pg. 18)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

● The parameters are the same as in the description on

[ ] = Factory-preset

 

page 20.

 

 

 

 

SOUND MODE and NARRATION

 

[ ] = Factory-preset

 

 

 

 

 

 

 

 

 

 

 

 

During tape playback, the camcorder detects the sound

 

 

 

 

 

 

 

 

 

BEEP

 

OFF / BEEP / [MELODY]

mode in which the recording was made, and plays the

 

 

 

 

 

 

 

 

 

 

sound back. Select the type of sound to accompany your

 

REMOTE

 

OFF / [ON]

playback picture. According to the menu access

 

 

 

 

 

 

 

 

explanation on page 18, select “SOUND MODE” or

 

DEMO MODE

 

OFF / [ON]

“NARRATION” from the Menu Screen and set it to the

 

 

 

 

 

 

 

 

 

PRIORITY

 

[LCD] / FINDER

desired parameter.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAM RESET

 

EXECUTE / RETURN

SOUND MODE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO DISPLAY

[STEREO

 

 

 

 

]: Sound is output on both “L” and “R”

 

 

 

 

channels in stereo.

 

 

 

 

 

 

 

 

 

The “n” (VIDEO DISPLAY) settings are effective only for

SOUND L

 

 

: Sound from the “L” channel is output.

 

 

 

SOUND R

 

: Sound from the “R” channel is output.

 

video playback except “BRIGHT”.

 

 

 

 

 

 

 

 

 

 

 

 

 

● The parameters (except “OFF” in ON SCREEN settings)

NARRATION

 

 

 

 

are the same as in the description on page 20.

[OFF]: Original sound is output on both “L” and “R”

 

[ ] = Factory-preset

 

 

 

 

 

 

 

 

 

 

 

 

channels in stereo.

 

BRIGHT

 

 

 

 

ON: Dubbed sound is output on both “L” and “R”

 

 pg. 9, “Brightness Adjustment Of The Display”

channels in stereo.

 

 

 

 

 

 

 

 

 

MIX: Original and dubbed sounds are combined and

 

 

 

 

 

 

 

 

 

ON SCREEN

 

OFF / [LCD] / LCD/TV

output in stereo on both “L” and “R” channels.

 

 

 

When set to “OFF”, the camcorder’s display disappears.

NOTES:

 

 

 

 

 

 

 

 

 

● You can also use AUDIO button on the provided remote

 

DATE/TIME

 

[OFF] / AUTO / ON

 

control ( pg. 15) to change the output sound (without

 

When set to “AUTO”, the date/time are displayed in the

 

having to access the Playback Menu).

 

 

 

following cases:

 

 

 

 

● The “SOUND MODE” setting is available for both 12-bit and

 

 

 

 

 

 

● When playback starts. The camcorder displays the date/

 

16-bit sound. (In previous models’ functions, “12-bit” is

 

time when scenes are recorded.

 

called “32 kHz” and “16-bit” is called “48 kHz”.)

 

 

 

● When the date is changed during playback.

● The camcorder cannot detect the sound mode in which the

 

 

recording was made during fast-forward or rewind. During

 

TIME CODE

 

[OFF] / ON

 

playback the sound mode is displayed in the upper left

 

 

 

 

 

 

 

 

 

corner.

 

 

 

 

 

 

 

 

REC MODE

[SP] / LP

Allows you to set the video recording mode (SP or LP) depending on your preference. It is recommended you use “REC MODE” in VIDEO Menu when using this camcorder as a recorder during dubbing. ( pg. 27, 28)

NOTE:

“REC MODE” can be set when the Power Switch is set to “PLAY” or “M”.

S/AV INPUT

[OFF]: Disables audio/video signal input from the AV and S-Video connectors. ( pg. 27)

ON: Enables audio/video signal input from the AV and S- Video connectors. ( pg. 27)