Connection To A Personal Computer

[A] Using USB cable OR [B] Using DV cable

To USB

To DV IN/OUT

 

Core filter

USB cable

DV cable (optional)

(provided)

 

 

Core filter

To USB

To DV

connector

connector

PC with DV

PCconnector

EDITING EN 29

[A] Using USB cable

It is possible to do the following things:

●Transfer still/moving images recorded on a tape to a PC.

●Capture still/moving images in real-time.

●Use this camcorder as a WebCam.

[B] Using DV cable

It is also possible to transfer still/moving images to a PC with a DV connector by using the provided software, software equipped with the PC or commercially available software.

NOTES:

● Refer to “SOFTWARE INSTALLATION AND USB

 

CONNECTION GUIDE” for the installation of the bundled

 

software and drivers.

 

● The software operation manual is provided as PDF file on

 

the CD-ROM.

 

● It is recommended to use the AC Adapter as the power

 

supply instead of the battery pack. ( pg. 7)

 

● Never connect the USB cable and the DV cable

 

simultaneously to the camcorder. Connect only the

 

cable you wish to use to the camcorder.

 

● When using a DV cable, be sure to use the optional

 

FEATURES

JVC VC-VDV206U or VC-VDV204U DV cable depending

 

on the type of DV connector (4 or 6 pins) on the PC.

 

● If the PC connected to the camcorder via the USB cable is

 

not powered, the camcorder does not enter the USB mode.

 

● The date/time information cannot be captured into the PC.

ADVANCED

● Refer to the instruction manuals of the PC and Software.

 

● The system may not work properly depending on the PC or

 

capture board you are using.

 

 

 

 

“USB MODE” and/or “ACCESSING FILES” appears

 

 

on the LCD monitor while the PC is accessing data

 

 

in the camcorder or the camcorder is transferring a

 

 

file to the PC.

 

 

NEVER disconnect the USB cable while

 

 

“ACCESSING FILES” is displayed on the LCD

 

 

monitor since this can result in product damage.