12 EN GETTING STARTED

Provided Accessories

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.

ORNOTE:

To confirm the lens cap is on correctly make sure the cap is flush to the camcorder.

Place here during shooting.

1AC Adapter AP-V14U or AP-V18U

2 Battery Pack BN-VF707U

3 Audio/Video Cable (ø3.5 mini-plug to RCA

plug)

4 USB Cable

5 Core Filter (for USB cable, pg. 13 for

attachment)

6 CD-ROM

7 Remote Control Unit RM-V740U

8 Lithium Battery CR2025* (for remote control

unit)

9 Shoulder Strap (see the right column for

attachment)

! Lens Cap (see the right column for attachment)

* A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.

NOTES:

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●Make sure to use the provided cables for connections. Do not use any other cables.

How To Attach The Shoulder Strap

Follow the illustration.

1 Thread the strap through the eyelet.

2 Fold it back and thread it through the strap guide and the buckle.

●To adjust the length of the strap, loosen and then tighten the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

 

Buckle
Strap guide

2

 

2

1 3

Eyelet