24 EN VIDEO PLAYBACK

Playback Using The Remote

The following buttons are available only when

the camcorder’s Power Switch is set to “PLAY”.

Control

2PAUSE Button

 

 

● Pauses the tape ( pg. 25)

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. ( pg. 25)

Up Button ( pg. 25)

3SLOW Rewind Button ( pg. 25)

4REW Button

●Rewind/Reverse Shuttle Search on a tape ( pg. 22)

●Displays previous file in a memory card ( pg. 27)

Installing The Battery

Left Button ( pg. 25)

5INSERT Button ( pg. 45)

The remote control uses one lithium battery (CR2025).

1 Pull out the battery holder by pushing the lock tab.

2 Insert the battery in the holder, and be sure to have the “+” mark visible.

2

1

3

1

Lock tab

6SHIFT Button ( pg. 25)

7DISPLAY Button ( pg. 23, 42)

8SLOW Forward Button ( pg. 25)

9PLAY Button

●Starts Playback of a tape ( pg. 22)

●Starts Auto Playback of images in a memory card ( pg. 27)

!FF Button

● Forward/Forward Shuttle Search on a tape

( pg. 22)

3 Slide the holder back in until you hear a click.

Beam Effective Area (indoor use)

When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is

5 m (16 ft).

Remote sensor

NOTE:

The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.

Buttons And Functions

● Displays next file in a memory card ( pg. 27)

Right Button ( pg. 25)

"A. DUB Button ( pg. 45)

#STOP Button

●Stops the tape ( pg. 22)

●Stops Auto Playback ( pg. 27)

Down Button ( pg. 25)

$EFFECT Button ( pg. 25)

%EFFECT ON/OFF Button ( pg. 25)

The following buttons are available when the camcorder’s Power Switch is set to “REC”. &Zoom (T/W) Buttons

Zoom in/out ( pg. 20, 25)

(Also available with the Power Switch set to “PLAY”)

(START/STOP Button

Functions the same as the Recording Start/ Stop Button on the camcorder.

)S.SHOT Button

Functions the same as SNAPSHOT on the camcorder.

(Also available with the Power Switch set to “PLAY”)

1Infrared beam transmitting window

●Transmits the beam signal.