|
|
| FEATURES FOR RECORDING EN 33 | |||
To lock the exposure control and the iris | Manual White Balance Adjustment | |||||
After step 5 of “Exposure Control”, adjust the exposure | ||||||
by rotating the MMENU/VOL. Wheel. Then lock the iris in | Adjust the white balance |
|
| |||
steps 6 and 7 of “Iris Lock”. For automatic locking, rotate |
|
| ||||
the MMENU/VOL. Wheel to select “AUTO”, then press it | manually when shooting |
|
| |||
under various types of |
|
| ||||
in step 5. The exposure control and the iris become |
|
| ||||
automatic. |
| lighting. |
|
|
| |
| 1 Set the Power Switch to |
|
| |||
|
|
|
| |||
Backlight Compensation |
| “M” while pressing down |
|
| ||
| the Lock Button located on |
| White paper | |||
|
| the switch. |
| |||
|
|
|
| |||
Backlight compensation |
| 2 Open the LCD monitor fully. ( pg. 12) |
| |||
brightens the subject quickly. |
|
| ||||
| 3 Set “u” to “MWB”. ( pg. 25) |
|
| |||
Press BACKLIGHT. The |
|
|
| |||
indicator is displayed and the |
| ● The | indication blinks slowly. |
|
| |
subject is brightened. If |
| 4 Hold a sheet of plain white paper in front of the | ||||
pressed again, |
| subject. Adjust zoom or position yourself so that the | ||||
disappears and the | BACKLIGHT Button | white paper fills the screen. |
|
| ||
brightness returns to the | 5 Press the MMENU/VOL. Wheel in until | begins | ||||
| ||||||
previous level. |
| |||||
| blinking rapidly. |
|
| |||
● Using the BACKLIGHT |
|
|
| |||
| ● When the setting is completed, | resumes normal | ||||
Button may cause the light around the subject to become | ||||||
blinking. |
|
|
| |||
too bright and the subject to become white. |
|
|
| |||
6 Press the MMENU/VOL. Wheel in twice. The Menu | ||||||
● Backlight compensations is also available when the Power | ||||||
Switch is set to “A”. |
| Screen closes and the Manual White Balance indicator | ||||
|
| is displayed. |
|
| ||
White Balance Adjustment |
| NOTES: |
|
|
| |
|
| ● In step 4, it may be difficult to focus on the white paper. In | ||||
The white balance that refers to the correctness of color | such a case, adjust focus manually. ( pg. 32) | |||||
reproduction under various lighting. If the white balance | ● A subject can be shot under various types of lighting | |||||
is correct, all other colors will be accurately reproduced. | conditions indoors (natural, fluorescent, candlelight, etc.). | |||||
The white balance is usually adjusted automatically. | Because the color temperature is different depending on | |||||
the light source, the subject tint will differ depending on the | ||||||
However, more advanced camcorder operators control | ||||||
white balance settings. Use this function for a more natural | ||||||
this function manually to achieve a more professional | ||||||
result. |
|
|
| |||
color/tint reproduction. |
|
|
|
| ||
| ● Once you adjust white balance manually, the setting is | |||||
|
| |||||
To change the setting |
| retained even if the power is turned off or the battery | ||||
Set “u” to the desired mode. ( pg. 25) | removed. |
|
| |||
●The selected mode indicator except “AUTO” appears.
[AUTO]: White balance is adjusted automatically.
MWB: Adjust the white balance manually when shooting under various types of lighting. ( “Manual White Balance Adjustment”)
FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
HALOGEN: A video light or similar type of lighting is used.
[ ] = Factory-preset
To return to automatic white balance
Set “u” to “AUTO”. ( pg. 25)
Or, set the Power Switch to “A”.
NOTE:
ADVANCED FEATURES
White balance cannot be used when “r” is set to “SEPIA” or “MONOTONE”. ( pg. 31)
