In the following pages, [ ] refers to Factory | TELE MACRO |
| ||
preset settings. |
| |||
[OFF]: Disables the function. | ||||
|
| |||
|
| ON: When the distance to the subject is less | ||
|
|
|
| Recording Menus |
|
| than 1 m (3.3 ft), set “TELE MACRO” to “ON”. | ||
|
|
|
|
| You can shoot a subject as large as possible at | ||
|
|
|
| ||||
|
| FUNCTION |
|
| a distance of approx. 40 cm (1.4 ft). | ||
|
|
|
|
| Depending on the zoom position, the lens may go | ||
The following menu settings can be changed | |||||||
|
| out of focus. | |||||
only when the Power Switch is set to “REC”. |
|
|
|
| |||
|
| DIS |
| ||||
|
|
|
|
|
|
( pg. 30), “Wipe or Fader Effects”
PROGRAM AE( pg. 30), “Program AE, Effects And Shutter Effects”
EFFECT( pg. 30, 31), “Program AE, Effects And Shutter Effects”
EXPOSURE( pg. 27), “Exposure Control”
W. BALANCE( pg. 29), “White Balance Adjustment”
SHUTTER( pg. 30, 31), “Program AE, Effects And Shutter Effects”
CAMERAThe following menu settings can be changed only when the Power Switch is set to “REC”.
ZOOM[34X]: When set to “34X” while using digital zoom, the zoom magnification will reset to 34X since digital zoom will be disengaged.
68X: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 34X (the optical zoom limit), to a maximum of 68X digital magnification.
800X: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 34X (the optical zoom limit), to a maximum of 800X digital magnification.
OFF : Disables the function. (DIS disable icon appears.)
[ON]: To compensate for unstable images caused by
NOTES:
●Accurate stabilization may not be possible if hand shake is excessive, or depending on the shooting condition.
●Switch off this mode when recording with the camcorder on a tripod.
●DIS cannot be activated when “NIGHT” in “PROGRAM AE”, or “STROBE” in “EFFECT” is selected or when LIGHT is set to on, or when SNAPSHOT is pressed.
GAIN UPOFF: Allows you to shoot dark scenes with no picture brightness adjustment.
[AGC]: The overall appearance may be grainy, but the image is bright.
AUTO : The shutter speed is automatically adjusted. Shooting a subject in low or poor lighting at slow shutter speed provides a brighter image than in the AGC mode, but the subject’s movements are not smooth or natural. The overall appearance may be grainy. While the shutter speed is
being automatically adjusted, “” is displayed.
WIND CUT[OFF]: Disengages the function.
ON : Helps cut down on noise created by wind. The “ ” indicator appears. The quality of the sound will change. This is normal.