TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording.
CLOCK ADJ.
Allows you to set the current date and time ( pg. 10).
DSC
|
| DSC |
|
|
| |
QUAL I TY |
| – | F I NE | |||
I MAGE S I ZE | – | 1024X768 | ||||
REC SELECT – |
|
|
| |||
RETURN
QUALITY , IMAGE SIZE
Refer to “Picture Quality/Image Size Setting” ( pg. 11).
REC SELECT
[ |
| ]: When Snapshot recording is performed |
|
with the VIDEO/MEMORY Switch 4 set to “VIDEO”, still images are recorded only onto the tape.
/ 
: When Snapshot recording is performed with the VIDEO/MEMORY Switch 4 set to “VIDEO”, still images are recorded not only onto the tape but also on the memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in the CAMERA Menu is also applicable to memory card recording.
For Playback Menu
The following procedure applies to all except Synchro Comp ( pg. 39).
1 Set the VIDEO/MEMORY Switch 4 to “VIDEO”, then set the Power Switch u to “PLAY” while pressing down the Lock Button y located on the switch.
2 Press the MENU/VOLUME wheel % in. The Menu Screen appears.
3 Rotate the MENU/VOLUME wheel % to select the desired function menu, and press it.
4 Rotate the MENU/VOLUME wheel % to select the desired function, and press it to display the Sub Menu.
5 Rotate the MENU/VOLUME wheel % to select the desired parameter and press it. Selection is complete.
6 Rotate the MENU/VOLUME wheel % to select
“
RETURN” and press it twice to close the Menu Screen.
VIDEO
V I DEO
SOUND MODE | – | STEREO | ||||
12b i t MODE | – | SOUND 1 | ||||
SYNCHRO | – |
| O . O | |||
| ||||||
REC MODE | – | OF F | ||||
|
|
| COPY | – | ||
| ||||||
|
|
|
| S / AV I NPUT – OF F | |
|
|
|
| RETURN | |
|
|
|
| ........ pg. 32, “Playback Sound”. | |
SOUND MODE |
| ||||
|
|
| ........ pg. 32, “Playback Sound”. | ||
12bit MODE |
|
| |||
|
|
|
|
| ........ pg. 39, “For More |
SYNCHRO | |||||
|
|
|
|
| Accurate Editing”. |
|
|
|
| ||
REC MODE |
|
| |||
Allows you to set the tape recording mode ([SP] or LP) depending on your preference ( pg. 10).
It is recommended you use “REC MODE” in the
“
VIDEO” Menu when using this camcorder as a recorder during dubbing ( pg. 33, 34).
•“REC MODE” can be set when the Power Switch u is set to “PLAY” or “ 
” ( pg. 10, 28).
COPY
ON: Enables dubbing of images recorded on a tape to a memory card ( pg. 21).
[OFF]: Enables snapshots to be taken during tape playback.
S/AV INPUT
ON: Enables audio/video signal input from the AV and
[OFF]: Enables audio/video signal output to a TV, VCR, etc. via the AV and
•When “S/AV INPUT” is set to “ON”, camcorder playback cannot be viewed on the AV output.
SYSTEM
SYSTEM
BEEP | – | MELODY |
TALLY | – | ON |
REMOTE | – | ON |
DEMO MODE | – | ON |
PR I OR I TY | – | LCD |
CAM RESET |
|
|
RETURN
Each setting is linked with “ 
SYSTEM”, which appears when the Power Switch u is set to “ 
” ( pg. 30).
The parameters are the same as in the description on pg. 30.
[ ] =
EN
USING MENUS FOR DETAILED ADJUSTMENT 31
