| VIDEO PLAYBACK | EN 23 | |
|
| ||
NOTES: | A To | ||
● Before starting Blank Search, if the current | has | ||
this case, it is not necessary to connect the | |||
position is at a blank portion, the camcorder | |||
searches in the reverse direction. If the current | yellow video cable.) | ||
position is at a recorded portion, the camcorder | B Yellow to VIDEO IN (Connect when your TV/ | ||
searches in the forward direction. | VCR has only A/V input connectors.) | ||
● If the beginning or end of the tape is reached | C Red to AUDIO R IN** | ||
during Blank Search, the camcorder stops | D White to AUDIO L IN** | ||
automatically. | * If your VCR has a SCART connector, use the | ||
● A blank portion which is shorter than 5 seconds of | |||
provided cable adapter. | |||
tape may not be detected. | |||
** Not required for watching still images only. | |||
| |||
●The detected blank portion may be located
between recorded scenes. Before you start | NOTES: |
recording, make sure there is no recorded scene | ● Set the video out select switch of the cable |
after the blank portion. | adapter as required: |
| Y/C: When connecting to a TV or VCR which |
| Connections To A TV Or VCR | accepts Y/C signals and uses an |
CVBS: When connecting to a TV or VCR which | |
Open the cover. | does not accept Y/C signals and uses an audio/ |
video cable. | |
To S connector | ● The |
the YTU94146A | |
| JVC Service Center described on the sheet |
| included in the package for details on its |
| availability. Make sure to connect the end with |
| a core filter to the camcorder. The core filter |
To AV connector | reduces interference. |
S cable |
| AV cable | |||||||
(optional) |
| (provided) | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 |
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3. If not, go to step 4.3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
“Y/C”/“CVBS”Cable
Video Out SelectAdapter*
Switch
To TV or VCR
TV
VCR
6 Start playback on the camcorder. ( pg. 22)
To choose whether or not the following displays appear on the connected TV●Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 37, 42)
Or, press DISPLAY on the remote control to turn on/off the date indication.
●Time code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 37, 42)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 37, 42)
CONTINUED ON NEXT PAGE