|
|
| FEATURES FOR RECORDING | EN 51 | ||
|
|
|
| |||
CAUTION: |
|
| Biphonic Recording | |||
|
| |||||
Do not remove the memory card or perform any |
|
| 460 only) | |||
other operation (such as turning off the camcorder) |
|
| ||||
during deletion. Also, be sure to use the provided |
|
|
|
|
| |
AC Adapter, as the memory card may be corrupted | ||||||
if the battery becomes exhausted during deletion. If | following procedure. | |||||
the memory card becomes corrupted, initialise it. |
|
|
|
|
| |
NOTES:
●Be sure to always use the same tape and memory card together as they were during recording; otherwise, the camcorder cannot recognise Tape and Memory Card IDs to perform Navigation Function properly.
●Check if an appropriate tape and memory card are loaded when the following messages appear:
“UNABLE TO USE NAVIGATION”, “THIS MEMORY CARD IS NOT COMPATIBLE”.
●If you change the memory card while shooting on one tape, two memory cards will share the tape’s thumbnail images. We recommend that you use one memory card for one tape.
●Navigation Search does not work if the current position is at a blank portion on the tape. Also, do not leave a blank portion partway through the tape when shooting; otherwise, Navigation Function does not work properly.
●Before shooting newly over a recorded tape, be sure to delete all thumbnail images of the previous recording from the relevant memory card.
●If you copy thumbnail images from one memory card to another via a PC, Navigation Search does not work with the copied memory card.
Mic for Biphonic (provided)
Core filter
Audio extension cable (provided)
To MIC connector
Open the cover.
1 Connect the Mic for Biphonic to the MIC connector and put them on to your ears.
2 Perform steps 1 – 4 in “Basic Recording” ( pg. 19).
3 Set “AUX MIC” to “BIPHONIC”. ( pg. 38, 40)
●“
” appears on the display.
4 To start recording, press the Recording Start/ Stop Button.
NOTES:
●When you put on Mic for Biphonic, never confuse left and right channel of it.
●During Biphonic
recording, be sure to turn your face toward the shooting subject along with the camcorder. Otherwise the sound does not correspond with the footage.
●Some noises may be picked up when you
touch the Mic for Biphonic during recording.
●Be sure to set “AUX MIC” to “NORMAL” when you use a microphone other than the Mic for Biphonic.