24 EN

RECORDING

 

Power Switch Shooting

 

Mode Switch

SNAPSHOT

 

Button

 

Lock Button

Recording Start/Stop Button

Advanced Features For Video And D.S.C.Progressive Mode Recording

This mode lets you record moving images (successive jitter-free still images) onto a tape. Images can then played back jitter-free, with superior quality. High-resolution still images can also be processed on a personal computer or can be printed out ( pg. 57).

1 Set the Shooting Mode Switch to “VIDEO”, then set the Power Switch to “” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

2 Set “CAMERA MODE” to “PS-VIDEO” in the Menu Screen ( pg. 28, 29).3 To start Progressive Mode Recording, press the Recording Start/Stop Button.To End Progressive Mode Recording . . .

.... press the Recording Start/Stop Button. The camcorder

enters the Record-Standby mode.

NOTES:

●When an image recorded using the Progressive Mode is played back, the image may not look natural.

●When “CAMERA MODE” is set to “PS-VIDEO”, Picture Wipe/Dissolve ( pg. 34) and some Program AE with special effects ( pg. 36) cannot be used.

●If SNAPSHOT is pressed in the PS-VIDEO mode, a snapshot will be recorded with higher quality than in

VIDEO mode. However, “MULTI-4” and “MULTI-9” cannot be used ( pg. 20).