40 EN
Power Zoom Lever (VOLUME)
Power Switch
|
|
|
|
|
Lock |
|
|
| |
|
|
| ||
Button | Speaker |
Rewind Button (2)
Stop Button (5)
Play/Pause Button (4/6)
2 Set the Power Switch to “” while pressing down the Lock Button located on the switch. To start playback, press 4/6.
•To stop playback, press 5.
•Press 2 to rewind, or 3 to
NOTES:
●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch to“OFF”, then to “”.●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV ( pg. 54).
●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.
●LCD monitor/viewfinder indications:•When power is supplied from a battery: the “” battery pack remaining power indicator is displayed.
When power is supplied through the DC cord: “ ” does not appear.•During Stop mode, none of the indications are displayed.●When a cable is connected to the AV connector, the sound is not heard from the speaker.
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
●When 4/6is pressed, the image may not pause immediately while the camcorder stabilizes the still image.
Shuttle Search: Allows●During playback, press and hold 2or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.
●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
2)Rotate the MENU wheel towards “+” for forward
●You can also use the provided remote control for