JVC GR-DV808 manual For More Accurate Editing, Prepare for R.A. Edit Play Back Dubbed Scene

64ENEDITING(Cont.)

For More Accurate Editing

Some VCRs make the transition from Record-Standby to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you’ve recorded scenes you didn’t want. For a cleanly edited tape, confirm and adjust the timing of the camcorder against your VCR.

Diagnosing VCR’s against Camcorder Timing

Remote sensor

	M
A	5S
OFF		Power Dial
Y
A
L
P

VCR		Program 1
(Recording deck)		IN	OUT	MODE
	1 – –	– – : – – ~
	2	~
	3	~
Lock!	4	~
	5	~
T W	6	~
	7	~
	8	~
	TIME CODE		– – : – –
		TOTAL 0 0 : 0 0
R.A.EDIT ON/OFF	Random Assemble Editing Menu

1

2

PREPARE FOR R.A. EDIT	3	PLAY BACK DUBBED SCENE
Play back the tape in the camcorder, then point
		•If any images from the scene prior to the
the remote control at the camcorder’s remote
sensor and press R.A. EDIT ON/OFF.		transition you chose for your Edit-In point
		were recorded, that means your VCR moves
• “Random Assemble Editing Menu” appears		quickly from Record-Pause to Record mode.
on the TV screen.		•If the scene you tried to dub starts in
		progress, the VCR is slow to start recording.
CHOOSE A SCENE

Perform Random Assemble Editing on Program 1 only. In order to check VCR and camcorder timing, select the beginning of a scene transition as your Edit-In point.