JVC GR-DVL915 specifications 76 EN

76 EN			TROUBLESHOOTING (cont.)
		SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
	35.	The LCD monitor image is	35. • During playback of the	35.
		distorted.	unrecorded portion, High-
			speed Search and still	————
			playback, LCD monitor
			indications appear distorted.
			This is not a defect.
	36.	Images on the LCD monitor	36. • The speaker volume is too	36. • Turn the speaker volume
		are jittery.	great.	down ( pg. 21).
	37.	There is no playback picture	37. •Since the analog input mode	37. • Set “S/AV INPUT” to “OFF” in
		on the connected TV.	is engaged, the camcorder is	the Menu Screen ( pg. 50).
			in the Record-Standby mode.
	38.	Blocks of noise appear	38.	38. •Clean the video heads with an
		during playback, or there is	————	optional cleaning cassette
		no playback picture and the		( pg. 86).
		screen becomes blue.
	39.	The LCD monitor, the	39.	39. • Wipe them gently with soft
		viewfinder and the lens have	————	cloth. Wiping strongly can
		become dirty (ex. finger-		cause damage ( pg. 77).
		prints).
	40.	An unusual mark appears.	40.	40. • Check the section of the
			————	manual that explains LCD
				monitor/viewfinder indica-
				tions ( pg. 80 – 84).
	41.	An error indication	41. • A malfunction of some kind	41. • Remove the power supply
		(E01 — E06) appears.	has occurred. In this case the	(battery pack, etc.) and wait a
			camcorder’s functions	few minutes for the indication
			become unusable.	to clear. When it does, you
				can resume using the
				camcorder.
				If the indication remains even
				though you repeat the above
				two or three times, please
				consult your nearest JVC
				dealer.
	42.	The charger indicator on the	42. • The temperature of the battery	42. • To protect the battery, it is
		camcorder does not light.	is extremely high/low.	recommended to charge it in
			• Charging is difficult in places	places with a temperature of
			subject to extremely high/low	10°C to 35°C (50°F to 95°F)
			temperatures.	( pg. 85).
	43.	When the image is printed	43. • This is not a malfunction.	43. • By recording with “DIS”
		from the printer, a black		activated ( pg. 47) this
		bar appears at the bottom		can be avoided.
		of the screen.
	44.	When the camcorder is	44. • The DV cable was plugged/	44. • Turn the camcorder’s power
		connected via the DV	unplugged with power	off and on again, then
		connector, the camcorder	turned on.	operate it.
		does not operate.
	45.	The memory card cannot	45.	45. • Push in the memory card a
		be removed from the	————	few more times ( pg. 14).
		camcorder.