Mode
1.Press MODE until you see the indicator light come on for the setting you desire.
2.Choose AUTO, COOL, FAN ONLY or POWER SAVER.
■Auto - Cools room while it automatically controls fan speed. You cannot change fan speed, but you can adjust temperature by pressing the plus or minus button.
■Cool - Cools room. You can select fan speed by pressing Fan Speed. You can then adjust temperature by pressing the plus or minus button.
■Fan Only - Only the fan runs. Display shows “FO” (fan only).
NOTE: Fan runs on Turbo speed only.
■Power Saver - Fan runs only when cooling is needed. Fan stops running when the room temperature matches the Temperature control setting.
Since the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.
Fan Speed
NOTE: The Fan Speed button will operate only when Cool or Power Saver mode has been selected.
1.Press FAN SPEED until you see the indicator light come on for the setting you desire.
2.Choose TURBO, HIGH or LOW.
Temperature
■Press the plus button to raise the temperature. Each time you press or hold the plus button, the temperature will go up
1º until it reaches 86°F (30°C).
■Press the minus button to lower the temperature. Each time you press or hold the minus button, the temperature will go down 1º until it reaches 64°F (18°C).
To change the temperature display from °F to °C:
1.Turn off the air conditioner.
2.While the air conditioner is off, press and hold down the MODE and FAN SPEED buttons while pressing POWER to turn the air conditioner on.
NOTE: Follow these same steps to change the temperature display from °C to °F.
Timer delay
To set the Timer for a 1- to
1.Press TIMER. Indicator light will flash.
2.Press the plus or minus button to adjust the delay time (1 to 24 hours).
3.Press TIMER again or wait 10 seconds. Indicator light will remain on.
To set the Timer to turn on the air conditioner, keeping previous settings:
1.Turn off air conditioner.
2.Press TIMER. Indicator light will flash.
3.Press the plus or minus button to change delay time (1 to 24 hours).
4.Press TIMER again or wait 10 seconds. Indicator light will remain on.
To set the Timer to turn on the air conditioner, changing the previous settings:
1.Turn air conditioner on.
2.Adjust MODE to Auto, Cool, Fan Only, or Power Saver.
3.Adjust FAN SPEED to Turbo, High or Low.
4.Adjust temperature between 64°F (18ºC) and 86°F (30ºC).
5.Wait 3 seconds before turning off air conditioner.
6.Press TIMER. Indicator light will flash.
7.Press the plus or minus button to change delay time (1 to 24 hours).
8.Press TIMER again or wait 10 seconds. Indicator light will remain on.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
Press and hold TIMER for 3 seconds. Indicator light will shut off.
To see the remaining time (in hours):
1.Press TIMER once after it has been programmed.
2.While the display is showing the remaining time, you can press the plus or minus button to increase or decrease the time.
11
